Heating & Temperature Control / Fermentation & More - Mega Sale! Save up to 28%


Mega Sale! Up to 28% off on Heating & Temperature Control (in Fermentation & More) at The Hoppy Brewer [22]. Top brands include Dwyer, Grainfather, Johnson Controls, Auber Instruments, Kombucha Kamp, Home Brew Ohio, Inkbird, Home Brew Stuff, Polar Ware, Stir-Plate, Kombrewery, Imake, Anvil Brewing, Eastern Shores Brewing, G Francis, & Brew Therm. Hurry! Limited time offers. Offers valid only while supplies last.



Dwyer® Magnehelic® Differential Pressure Gage, 2002,: 0-2" w.c.
By Dwyer
In Stock
$76.53

mpn: 2002, ean: 0696335149561,

4.7 out of 5 stars with 49 reviews
The Original Dwyer Magnehelic gage for high accuracy, within 2 percent of full scale, and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures, either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too. The Mag


Grainfather Conical Cooling Pump Kit
By Grainfather
In Stock
$74.99

mpn: 7539853474, ean: 0677572000006,

4.5 out of 5 stars with 55 reviews
Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole fermentation process to ensure the yeast doesn't get stressed and ferments correctly to get the right flavour profile. Once your target temperature is below the temperature of the wort in your fermenter the Cooling Pump Kit pumps ice cold water through the double walled insulated interior to cool down your wort. Simply connect the couplers and insula


Johnson Controls A421ABD-2C Electronic Temperature Control, Single Stage
By Johnson Controls
In Stock
$104.95
$101.73
You Save: 3%

mpn: A421ABD-02C,

4.9 out of 5 stars with 21 reviews
The A421 Series Electronic Temperature Controls are single-stage controls with a single-pole, double-throw (SPDT) output relay, a bright backlit LCD, and a three-button touchpad interface that can be set up to restrict user adjustments. An LED indicates the output relay's On/Off status. The A421 Series Controls have simple On and Off temperature settings for heating or cooling, an adjustable anti-short cycle delay, and a temperature offset function. The control range is -40 to 212°F (-40 to 100


PID TEMPERATURE CONTROLLER,W/ 30 RAMP/SOAK, RELAY OUTPUT
By Auber Instruments
In Stock
$89.95

mpn: SYL-2342P, ean: 0701098737792,

4.7 out of 5 stars with 23 reviews
US Seller! Ship from GA! This is a brand new, dual display, 1/16 DIN sized (1.89x1.89'' or 48 x 48 mm) programmable PID temperature/process controller. This controller is for applications where it is desirable to have the set point automatically adjust itself over time. Up to 30 steps can be programed to A) ramp the temperature up or down at controlled rate, B) Maintain the temperature for a specific period time, C) turn on/off the relays (alarm relay) after process reaches a specific step. Thi


The Kombucha Mamma Essential HEATING STRIP
By Kombucha Kamp
In Stock
$59.95
$54.95
You Save: 8%

mpn: 3550,

4.8 out of 5 stars with 42 reviews
THE KOMBUCHA MAMMA ESSENTIAL HEAT STRIP - with MANUAL CONTROL - Move the unit closer or further away from the vessel to achieve the desired heating range. It is a common homebrewers refrain: ''How can I keep my Kombucha brew warm, especially in Spring, Fall and Winter?'' Until now, standard beer heating belts and weakly powered seedling mats were the only choices available. If you're house is cold, they won't help! The Kombucha Mamma Year Round Heating System w/Dimmer was designed by Kombucha Ka


Home Brew Ohio Best Brew Belt
By Home Brew Ohio
In Stock
$27.28

mpn: 14435, ean: 0798145229706,

4.0 out of 5 stars with 46 reviews
Brew Belt Fermentation Heating Belt. The Brew Belt is an adjustable heating belt that wraps around a 6-6.5 gallon (23 L) plastic fermenter. It will maintain at a constant brewing temperature of 75-80 deg F. up to 8 days. Brewing in cold or damp conditions often requires this additional heat source to maintain minimum fermentation temperatures., Brewer's Best/Vintner's Best Brew Belt, Package Contains 1-Count of Brew Belt Fermentation Heating Belt, An Adjustable Heating Belt that Wraps Around a 6


Dwyer Magnehelic Series 2000 Differential Pressure Gauge, Range 0-3 psi
By Dwyer
In Stock
$68.85

mpn: 2203, ean: 0689869952783,

4.8 out of 5 stars with 50 reviews
Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.Bezel provid


Inkbird Digital PID Temperature Controller Position Control Thermostat AC 100 to 240V ITC-100RH with PT100 Thermocouple
By Inkbird
In Stock
$32.99

mpn: ITC-100RH + PT100, ean: 0705701559245,

4.7 out of 5 stars with 32 reviews
Model Number: ITC-100RH --- One Relay output + One Relay Alarm Output; AC100-240V; Specification Front Panel Dimension: DIN 48mm(W)X48mm(L) Power Supply Voltage: AC 100-240V 50/60Hz Operating voltage range: 85~110% Rated voltage Power Consumption: Approx. 5VA(100~240VAC) Character: PV: 4 digital 9.9mm height Red LED Letters SV: 4 digital 8mm height Green LED Letters Display Accuracy: ±0.2%FS 0.1ºC(<1000ºC);1ºC(≥1000ºC) Period of Sampling: 0.5S Tempera


Refrigerator or Freezer Thermostat (Temperature Controller)
By Home Brew Stuff
In Stock
$58.99

mpn: TH-AC,

4.8 out of 5 stars with 39 reviews
This thermostat, with a 5 foot extendable stainless steel sensor, is perfect for controlling the temperature of your freezer, refrigerator, air conditioner, or heater for Fermentation or lagering. Not affected or damaged by electrical grid surges and lightning strikes, or power outages - like a digital thermostats are! Easy to use, just plug it in, and plug the appliance you want to control into the back of the box.LOAD: 16 full load amps @ 120Vac. Easy installation - Just plug in to back of cor


Polar Ware Stainless Steel Thermometer with 3-Inch Face and 4-Inch Probe
By Polar Ware
In Stock
$39.90

mpn: 005015, ean: 0671080016832,

4.0 out of 5 stars with 31 reviews
Get more out of your brewing setup with the Polar Ware Stainless Steel Thermometer. Designed for Polar Ware BP and BPSG series brew pots, this dial thermometer features a large face for easy and efficient temperature readings. With a 4-inch probe and 3-inch face, the thermometer is made from stainless-steel for superior strength and corrosion resistance. Know the temperature of your wort at any time in the brewing process with this thermometer in the specialized port of select Polar Ware brew po


240v Electric Brew Pot/Electric Still Boil Controller (4 Prong L14-30 Power Plug)
By Stir-Plate
In Stock
$254.99

mpn: 8W-61ZF-ED3K, ean: 0660078997529,

4.7 out of 5 stars with 47 reviews
Our brew kettle controller designed for up to a 6000 watt element to boil up to 12 - 15 gallons of wort with a reasonable time to boil of about 30 minutes. You will need a 240V, 30 Amp dedicated circuit to run this controller. The controller also powers smaller wattage 240V elements if you have something smaller in mind for your brew pot. Designed to control your rate of boil - no temperature feedback (none needed for boil). Easy to read graduated aluminum face plate - so you can record your boi


Brewer's Best/Vintner's Best Brew Belt Model: (Home & Kitchen)
By Home Brew Ohio
In Stock
$24.95

mpn: Does Not Apply, ean: 7153004549280,

4.7 out of 5 stars with 60 reviews
Brew Belt Fermentation Heating Belt. The Brew Belt is an adjustable heating belt that wraps around a 6-6.5 gallon (23 L) plastic fermenter. It will maintain at a constant brewing temperature of 75-80 deg F. up to 8 days. Brewing in cold or damp conditions often requires this additional heat source to maintain minimum fermentation temperatures.Brewer's Best/Vintner's Best Brew Belt. Package Contains 1-Count of Brew Belt Fermentation Heating Belt. An Adjustable Heating Belt that Wraps Around a 6-6


Kombrewery Brew Hugger PRO -- Fermentation Heating Belt for Kombucha Home Brew With Power Dial and Thermometer Strip
By Kombrewery
In Stock
$32.99

mpn: COMINHKPR131024, ean: 0745037201739,

4.8 out of 5 stars with 38 reviews
So, want to bring your kombucha brewing game to the next level?The Kombrewery Brew Hugger PRO provides customizable heat output, so you can pump out delicious new batches week after week with total 'buch control!Perfect accessory for larger-scale home brewingThe Brew Hugger PRO accommodates plastic, metal, ceramic, or glass jars and containers. The heating filament itself is 35'' long, perfectly suited for home brew vessels up to 8 gallons in volume. Alternatively, it can be wrapped around 2 sma


Mangrove Jacks Heat Pad by iMake
By Imake
In Stock
$34.99

mpn: 8541956806, ean: 0677572000013,

4.0 out of 5 stars with 20 reviews
Mangrove Jack's Heating Pad gives an evenly distributed, gentle warming of your entire fermenting wine and beer. No hot spots. Do not use when room temperature is above 18° C (65° F)Perfect for people making wine or beer in cool basements, houses.. Effective in rooms as cool as 55° F (13° C). Saves on power. Inexpensive to run. Only draws 25 watts of electricity.. The only warmer designed for bath glass and plastic fermenters.. Comes with a 6' long power cord..


Inkbird ITC-308 Thermostat 110V, 1100W Pre-Wired Dual Stage Digital Temperature Controller Outlet Heating & Cooling for Homebrewing Refrigerator etc.
By Inkbird
In Stock
$119.00

mpn: B01FTNL4DE, ean: 0747380911723,

4.3 out of 5 stars with 21 reviews
If you don't want to build your own STC-1000, the Inkbird ITC-308 is the solution! Features: Temperature Control Range : -50~99 °C / -58~210 ° F Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) Temperature Control Mode :On/Off Control, Heating and Cooling Input Power: 100 ~240VAC, 50Hz/60Hz Temperature Control Output: Max. 10A, 100V ~240V AC Dimension Body: 140x68x33mm (5.5x2.7x1.3inch) Socket: 85x42x24mm(3.3x1.7x1inch) Sensor Len


Temperature Controller
By Anvil Brewing
In Stock
$29.99

ean: 0683828753664,

4.0 out of 5 stars with 16 reviews
The ANVIL temperature controller is tuned and designed for home brewing. No need to spend time configuring and fiddling with settings. Just plug it in and start controlling your temps! The unique design has an integral male plug on the back allowing it to be to plugged into any 120V wall receptacle greatly reducing cable clutter and eliminating the need to drill holes for mounting. Simply plug your refrigerator or pump into the front and you're ready to go. The 9.5 ft long sensor cable reaches a


Cooling System For Anvil 7.5 Gallon Bucket Fermenter
By Eastern Shores Brewing
In Stock
$149.99

ean: 0680611904265,

4.9 out of 5 stars with 26 reviews
Temperature control is a very important part of fermentation for optimal flavor control and quality of the finished beer. With the ANVIL cooling system you wont be disappointed. This simple system includes virtually everything you need to keep your beer temperature closely regulated at an amazing price. Needed, but not included, is a cooler filled with water and ice, or a glycol chiller. This system includes: Sanitary Stainless Steel Cooling Coil 12'' Sanitary Stainless Steel Thermowell 4 Hol


Homebrew Electric Fermentation Heating Thermostat and Probe - Kombucha, Beer Wort, Wine Brewing Digital Heat Controller
By G Francis
In Stock
$20.99

mpn: 4354, ean: 0688295884354,

4.5 out of 5 stars with 50 reviews
After sanitation, temperature control is important for good fermentation and great tasting beer, and the G. Francis Homebrew Electric Fermentation Heating Thermostat and Probe - Kombucha, Beer Wort, Wine Brewing Digital Heat Controller makes that happen. To use, plug your heater into the 3-prong outlet on thermostat, plug the thermostat into a wall outlet using the 5.5-foot (1.7m) power cord, set a desired temperature from 68°F to 108°F, immerse the probe into your wort, and use the included s


Dwyer Magnehelic Series 2000 Differential Pressure Gauge, Range 0-150"WC
By Dwyer
In Stock
$63.50
$45.72
You Save: 28%

mpn: 2150, ean: 0128030294753,

4.4 out of 5 stars with 52 reviews
Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too.Bezel provid


Fermentation Heater by Brew Therm, LLC Ideal for home brewing of beer, wine, and kombucha!
By Brew Therm
In Stock
$24.99

ean: 0616316605961,

4.0 out of 5 stars with 34 reviews
Fermentation heaters or mats are used to maintain consistent temperatures throughout the brewing vessel. These heaters can be shortened based on the size of your brewing container. These units are ideal for the home or weekend beer, wine, and kombucha brewer. This product comes with a one year manufacturer warranty. For best results: pair with a temperature controller.RELIABLE AND PROVEN. This heat source has been used for over a decade.. CAN BE USED WITH DIFFERENT SIZES OF FERMENTATION VESSESL.



Viewing Page 1 of 3



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - thehoppybrewer.com. All Rights Reserved.