Free Shipping Included! YUCHENGTECH Mud Hydrometer Liquid Densimeter Hydrometer Mud Scale Mud Balance Gravity Balance Areometer Range 0.96-2.5 g/ cm3 Accuracy 0.01g/cm3 by YUCHENGTECH at The Hoppy Brewer. MPN: YUCHENG762. Hurry! Limited time offer. Offer valid only while supplies last. Usually the product will be sent in 1-4 working days and takes about 2--7 business days to reach you. Working principle Mud hydrometer is used in industry or laboratory to measure mud weight in g/mm3. The hydrometer is a balance with unequal arms. On the left side of the lever, there is a graduated code device. The moving code can directly read the mud weight on the scale. The balance of the lever can be indicated by a horizontal bubble at the top of the lever. Instructions: 1. When in use, po
Product Description & Reviews
Usually the product will be sent in 1-4 working days and takes about 2--7 business days to reach you. Working principle Mud hydrometer is used in industry or laboratory to measure mud weight in g/mm3. The hydrometer is a balance with unequal arms. On the left side of the lever, there is a graduated code device. The moving code can directly read the mud weight on the scale. The balance of the lever can be indicated by a horizontal bubble at the top of the lever. Instructions: 1. When in use, pour the mud into the mud cup until it is flush with the cup, and gently close the lid. The excess mud and air will be discharged from the small hole in the middle of the lid; 2. Wipe the spilled mud clean, and then put the lever on the base; 3. Slowly move the weight. When the bubbles are in the center, the lever is in a horizontal state. The scale shown on the left side of the weight is the specific gravity of the mud; 4. Rinse and wipe after use to avoid affecting subsequent use. Calibration method: To check the accuracy of the instrument, fill the mud cup with distilled water. If the specific gravity measured by the same method is 1, it indicates that the hydrometer is accurate. If the measured result is not 1, the balanced cylinder cover of the mud hydrometer can be unscrewed to increase or decrease the metal particles in the cylinder, so that the specific gravity measured is 1. Parameters: 1. Scope: 0.96-2.5g/cm3 2. Measurement accuracy: 0.01g/cm3 3. Mud cup capacity: 140 cm 3
Features & Highlights
- 1.It is used for the analysis and determination of liquid density in various oil fields, geological exploration and laboratory.
- 2.It is mainly used to determine the density of drilling fluid and other liquid material density of the special instrument.
- 3.The liquid densimeter is made of engineering plastic sample cup, with strong corrosion resistance, the scale of the use of single scale calibration for metric g/cm3.
- 4.Anti-corrosion technology, clear scale, fine wear resistance, double-row scale display, to meet different needs.
- 5.The measurement accuracy is 0.01g/cm3, and the mud cup capacity is 140cm3.
7 x 5 x 21 inches
Have questions about this item (YUCHENG762), or would like to inquire about a custom or bulk order?
If you have any questions about this product by YUCHENGTECH, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
This H-B Instrument DURAC Salt Brine plain form hydrometer has a range of 0 to 26.5, is individually serialized, and features a metal ballast. Graduated in percent by weight of sodium chloride. Has a temperature of standardization 60°F/60°F. Each h...
Globe Certified!Plain-form hydrometer used to measure the density of liquid at 60° F. Specific gravity range: 1.000 to 1.070 with 0.0005 graduations. Length, 325 mm. Meets specifications for the Globe Program®.Globe Certified! Plain-form hydrometer...
These hydrometers conform to the accuracy requirements for ASTM hydrometers. Scales are affixed with clear epoxy. Each hydrometer is calibrated in a triple accredited ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration ...